LED City Luminaire E Medium
Back to OverviewModel 361 - 364
The luminaire range of the E series is characterised by a timeless design and a luminaire body of high-grade, sturdy cast aluminium.
The City Luminaire E Medium is particularly suited for a standard-compliant illumination of through roads and pedestrian crossings. Its wide-beam optics allows for large light pole spacing. As low wattage version, it is also first choice for residential streets and car parks.
By an ingenious thermal management and by directly linking the LED to the enclosure additional heat sinks can be omitted. Inside the luminaire the highly efficient MCOB-technology, in connection with accurate light guidance, provides for perfect illumination by high-quality mirror reflectors.
The luminaires are equipped with highly efficient LED modules supplying nominally
120 lm/Watt (at 5,000 K).
Recommended pole height: 5 – 10 meters
|
Typical application areas |
Light distribution curve |
Light distribution curve |
|||
| M2 | P2 | x |  |
 |
|
| M3 | P3 | x | |||
| M4 | x | P4 | x | ||
| M5 | x | P5 | x | ||
| M6 | x | P6 | x | ||
| Wattage / output* | 42 Watt | 3,478 lumen |
| 60 Watt | 4,968 lumen | |
| 75 Watt | 6,210 lumen | |
| 90 Watt | 7,452 lumen | |
| 100 Watt | 8,280 lumen | |
| *effective 83 lm/Watt at 5,000 K | ||
| Colour temperature | 3,000 K / 4,000 K / 5,000 K | |
| Light distribution | Asymmetrical / symmetrical | |
| Mounting | Side-/top-mounting | |
| Spigot size | 42 mm / 60 mm / 76 mm | |
| Dimensions l x w x h [mm] | Weight [kg] | Wind load [m²] |
| 506 x 298 x 110 | 9.2 | 0.08 |
Design, material and mounting
- Enclosure of high-quality non-corroding aluminium without external cooling fins
- High-quality powder coating acc. DB 703 (graphite), on request all RAL colours
- Direct mounting on the pole without additional work, connecting cable pre-assembled (optionally)
- Illuminant cover of single-pane safety glass
- External screw connections of high-grade steel
- Optimal thermal management by directly linking the LED modules with the enclosure
- Use of heat conducting paste (alternatively heat conducting foil)
- Integrated pressure compensation valve
- Degree of enclosure protection: IP 65
Lighting technology
- Multi-chip-on-board LED (MCOB)
- Highly efficient reflector technology (MIRO ultra-pure aluminium or chromed plastic reflectors)
- MCOB-LED approved acc. to IESNA LM 80-08
- Service life LED: 50,000 h – L90, B10 // 100,000 h – L70, B10
- Needs-based light distribution
Electrical design
- Voltage 195-265 V / 50 Hz
- LED module and electronic ballast separately removable and plug-connected
- Electronic constant current LED ballast, efficiency 93 %
- Power supply interference-suppressed acc. DIN EN 61000-6-3/-4, EN 55011,
EN 55022 CI. B, PFC corrected - Protection class II acc. to VDE 0140 (DIN EN 61140)
- Power supply degree of enclosure protection IP 65
- Standard connection by means of Wieland plugs series ST18
- Overvoltage protection 4 kV (optionally 10 kV, external module)
- ENEC 05 tested and approved
- Wired ready for operation acc. to EN 60598
- Night-time dimming (power reduction down to 50 % via 2nd phase)
- Optionally, equipped with a telemanagement system
Subject to technical modifications!
